Getting Right With The Embroidery Needle

You need not be an expert since even an amateur can tell you that when you look to get started with embroidery. Whether traditional hand method or with machine embroidery you should always have a good look at the needle you need to select.

However, it is easier said than done, since it is not easy to get going with the needle. That should be perfect with your selection for embroidery.

Needles are an important part used for stitching and embroidery, and this is the reason you should pick the correct ones only while working on your production. The quality set for your merchandise should be set for the highest standards such as steelers embroidery design.

Embroidery needles vs Sewing needles

Since embroidery is somewhat similar to sewing, the needles used here are dedicatedly made for embroidery. Then there are basic sewing needles as well. Both of these needles are distinctive and some differences set them apart.

The two key distinctions between embroidery and basic sewing needles are the scarf and the size of the eye. The first distinction that you would see here between the two needles is the hole at the end of the needle.

You will see a larger eye in the embroidery needles that helps the thread from breaking or fraying.

It proceeds a bit above the eye and then goes on to be till the shaft of the needle. Embroidery needles provide a specially shaped scarf, that allows the thread to go with very less strain. The same way any larger eye would do.

What else to look at with needle selection

While we have talked about the size and shape of the eye along with the scarf of the needle that determines how a needle should be selected for any such LSU logo vector designing through embroidery work.

But there is some other important stuff as well to keep in mind for the needle needed in your production.

This is because eventually they all will show affect how the stitching will be done. It has the right influence on the visual and quality of the finished product.

Taking a look at the “blade” of the embroidery needle which is also the shaft (the long thin body of the needle)

The thickness of the shaft will tell you the needle’s size and the thicker ones mean the needles have a large size. Whereas with the thinner shafts you get to know they have a small size.

There is a groove to be noticed just down the centre of the shaft. The thread fits in there to make the stitches for the embroidery.

This is to ensure that there is not fray or thread catching while the process of embroidery going on. This way the whole process will generate a near-perfect artwork in the form of embroidery.

If you are working on a thicker fabric then the shaft needles will be chosen that has a larger diameter shaft in their needles. Whereas thinner fabric will demand thinner diameter needles.

The needle and its importance

The tip of the needle is something you cannot overlook while you are looking for perfection. Since it is the first that will come in touch with the fabric and provides the right sized hole for the thread and designing. Although there are several types of needle tips available. We will be looking at few selected ones based on their tip sharpness.

1. The sharp point tip

As the name suggests, this is the sharpest option available with your needle tip and it all sums up with its name only.

Needles with these tips are generally used with tightly woven fabric. Such as special paper applications or quilt pieces of cotton.

2. The ballpoint tip

This type of needle has a more rounded tip that is designed to spread the yarns instead of cutting them in yarn.

Once the knit fiber breaks under any circumstances, it will leave a hole or run in the fabric. With the ballpoint tip, there will be no cut at the knit fibers.

3. The extra slim or slender ballpoint tip

This type of needle is used most of the time but this might not be the ideal solution to provide a clear stitch with any woven fabrics.

Also Read: All types of dab pen cartridges

Leave a Reply

Your email address will not be published. Required fields are marked *